Tag: 3D print
Samyang 135mm f/2 Lens Collar – New Design
I’ve used a very reliable lens collar that I designed and printed for the Samyang 135mm f/2…
Printing A Bahtinov Mask – A Brief How To Guide
Suddenly I realized that I have quite a few things to talk about. Hmmm, perhaps I should…
Heart and Soul Nebulae – 135mm Unmodified
I had to wait a while for the skies to clear to continue testing the Gamma Star…
Introducing Star Tracker Gamma – At Last!
The weather lately has been downright awful. I’m seriously thinking I’m in the absolute worst location for…
More Star Tracker Testing – I’ve Seen Enough
On the distant horizon, the orange and rose clouds fought valiantly to hold onto their firey glory…
Testing Gamma with My Samyang 135mm Lens
So Star Tracker Gamma works fine with the 50mm lens but that isn’t my goal. I’m on…
Star Tracker Gamma Works – First Test Results!
I found myself working against the clock a couple of days ago. The skies were clear and…
Adventurer 3 Printer Upgrade – Back On Track
I haven’t been out imaging in over a week and that’s not due to a lack of…
The Forgiving 50mm – Beta’s Surprising Results
I have to admit. After testing Star Tracker Beta with the Samyang 135mm f/2 I was feeling…
Beta Testing – Taking the New Star Tracker for a Spin
I feel like a little kid at Christmas. The anticipation of getting outside and testing Beta was…
DIY Star Tracker Beta – Camera Mount Component
It seems like it has taken me a long time to get to this point. But here…
DIY Star Tracker Beta – Counterweight Design
OK, things are getting real with Star Tracker Beta as I move on to designing and printing…